PartsTable
Technical Data Sheet
PartsTable / MRO / B1201
B1201 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, cone_width: 0.8125 INCHES NOMINAL IN, body_length: 0.781 INCHES NOMINAL IN, shaft_style: ROUND, shaft_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3158, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ B1201
NSN: 3110-00-100-3158
FSC: 3110
CAGE: 23040 — FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
cone_width0.8125 INCHES NOMINAL IN
body_length0.781 INCHES NOMINAL IN
shaft_styleROUND
shaft_length0.750 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.656 INCHES NOMINAL IN
bore_diameter1.1895 INCHES NOMINAL IN
overall_length1.531 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
NSN3110-00-100-3158
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: B1201 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
CONE WIDTH: 0.8125 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 1.1895 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
CONE WIDTH0.8125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
BORE DIAMETER1.1895 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
4019Interchangeable
interchangeable cross-reference
interchangeable
1515Interchangeable
interchangeable cross-reference
interchangeable
51078Interchangeable
interchangeable cross-reference
interchangeable
15250Interchangeable
interchangeable cross-reference
interchangeable
BLUHI100000HMSInterchangeable
interchangeable cross-reference
interchangeable
0N275467-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy B1201?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B1201?
B1201 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace B1201?
There are 23 known substitutes for B1201: 4019, 1515, 51078 and 20 more. Substitute compatibility should be verified for your specific system.
Is B1201 still available?
B1201 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B1201

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026