PartsTable
Technical Data Sheet
Download PDF

B1-9064 — B1-9064

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

B1-9064: B1-9064.

The B1-9064 is a the manufacturer industrial component. Key specifications include color: YELLOW THIRD POSITION COATING ALL CONDUCTORS, material: PLASTIC POLYIMIDE AND PLASTIC FLUORINATED ETHYLENE PROPYLENE SECOND POSITION TAPE ALL CONDUCTORS, tracer_color: ORANGE SINGLE TRACER THIRD CONDUCTOR, conductor_form: STRANDED ALL CONDUCTORS, voltage_rating: 600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE ALL CONDUCTORS, special_features: A SINGLE GREEN BAND SHALL BE APPLIED EVERY 2 3/4 INCHES ON BASIC WIRE IN. This part is cataloged in the U.S.

Government catalog under NSN 6145-01-356-3239, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ B1-9064
NSN: 6145-01-356-3239
FSC: 6145 — Wire and Cable, Electrical
CAGE: 12515 — NEXANS AEROSPACE USA LLC (USA)
SPECIFICATIONS
colorYELLOW THIRD POSITION COATING ALL CONDUCTORS
materialPLASTIC POLYIMIDE AND PLASTIC FLUORINATED ETHYLENE PROPYLENE SECOND POSITION TAPE ALL CONDUCTORS
tracer_colorORANGE SINGLE TRACER THIRD CONDUCTOR
conductor_formSTRANDED ALL CONDUCTORS
voltage_rating600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE ALL CONDUCTORS
special_featuresA SINGLE GREEN BAND SHALL BE APPLIED EVERY 2 3/4 INCHES ON BASIC WIRE IN
surface_treatmentNICKEL CORE CONDUCTOR ALL CONDUCTORS
conductor_quantity4
round_conductor_size22 AWG ALL CONDUCTORS
cross-sectional_width0.101 INCHES NOMINAL IN
cross-sectional_height0.101 INCHES NOMINAL IN
cross-sectional_shape_styleTWIST
NSN6145-01-356-3239
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: B1-9064 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROUND CONDUCTOR SIZE: 22 AWG ALL CONDUCTORS
•
VOLTAGE RATING: 600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE ALL CONDUCTORS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B355 ASSN STD SINGLE TREATMENT RESPONSE CORE CONDUCTOR ALL CONDUCTORS
•
CROSS-SECTIONAL HEIGHT: 0.101 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.101 INCHES NOMINAL IN
•
TRACER COLOR: BLUE SINGLE TRACER SECOND CONDUCTOR
TECHNICAL CHARACTERISTICS
ROUND CONDUCTOR SIZE22 AWG ALL CONDUCTORS
VOLTAGE RATING600.0 MAXIMUM ROOT MEAN SQUARE (RMS) OPERATING VOLTAGE ALL CONDUCTORS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B355 ASSN STD SINGLE TREATMENT RESPONSE CORE CONDUCTOR ALL CONDUCTORS
CROSS-SECTIONAL HEIGHT0.101 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.101 INCHES NOMINAL IN
TRACER COLORBLUE SINGLE TRACER SECOND CONDUCTOR
TRACER COLORGREEN SINGLE TRACER FOURTH CONDUCTOR
TRACER COLORORANGE SINGLE TRACER THIRD CONDUCTOR
CONDUCTOR QUANTITY4
STRAND AWG SIZE PER CONDUCTOR34 ALL CONDUCTORS
SUBSTITUTES & CROSS-REFERENCES 4
M7078/27-22-4Reference document
Same NSN cross-reference
Reference document — Identification reference
MIL-C-7078/27Reference document
Same NSN cross-reference
Reference document — Identification reference
30-90473/22Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LE572-0053-1224Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B1-9064?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B1-9064?
B1-9064 is a B1-9064. It is classified as a MRO (MRO_GENERAL).
What parts can replace B1-9064?
There are 4 known substitutes for B1-9064: M7078/27-22-4, MIL-C-7078/27, 30-90473/22 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B1-9064?
B1-9064 is cataloged in the U.S. Government catalog under NSN 6145-01-356-3239. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B1-9064