PartsTable
Technical Data Sheet
Download PDF

B0W479S10 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

B0W479S10: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN, overall_height: 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, outside_diameter: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, material_thickness: 0.010 INCHES NOMINAL IN, material_document_and_classification: MIL-C-6942 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-817-4618, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B0W479S10
NSN: 5310-00-817-4618
FSC: 5310 — Nuts and Washers
CAGE: 73287 — HUBBARD M D SPRING CO INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
overall_height0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
outside_diameter0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
material_thickness0.010 INCHES NOMINAL IN
material_document_and_classificationMIL-C-6942 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-817-4618
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: B0W479S10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-6942 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
HOLE DIAMETER: 0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-6942 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
1JA3484H03Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B0W479S10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B0W479S10?
B0W479S10 is a WASHER,SPRING TENSION.
What parts can replace B0W479S10?
There is 1 known substitute for B0W479S10: 1JA3484H03. Substitute compatibility should be verified for your specific system.
What is the NSN for B0W479S10?
B0W479S10 is cataloged in the U.S. Government catalog under NSN 5310-00-817-4618. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B0W479S10