PartsTable
Technical Data Sheet
Download PDF

B001200P01008-5 — RESTRICTOR,FLUID FLOW

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

B001200P01008-5: RESTRICTOR,FLUID FLOW.

The RESTRICTOR,FLUID FLOW is a the manufacturer industrial component. Key specifications include outside_diameter: 1.265 INCHES MINIMUM AND 1.269 INCHES MAXIMUM IN, special_features: THICKNESS:0.135 MINIMUM INCHES AND 0.145 MAXIMUM INCHES;INSIDE DIAMETER:0.333 MINIMUM INCHES AND 0.337 MAXIMUM INCHES;, end_item_identification: FUEL AND ECS FUSELAGE, part_name_assigned_by_controlling_agency: ORIFICE. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-706-0090, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B001200P01008-5
NSN: 4730-01-706-0090
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 78022 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
outside_diameter1.265 INCHES MINIMUM AND 1.269 INCHES MAXIMUM IN
special_featuresTHICKNESS:0.135 MINIMUM INCHES AND 0.145 MAXIMUM INCHES;INSIDE DIAMETER:0.333 MINIMUM INCHES AND 0.337 MAXIMUM INCHES;
end_item_identificationFUEL AND ECS FUSELAGE
part_name_assigned_by_controlling_agencyORIFICE
NSN4730-01-706-0090
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: B001200P01008-5 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.265 INCHES MINIMUM AND 1.269 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER1.265 INCHES MINIMUM AND 1.269 INCHES MAXIMUM IN
SPECIAL FEATURESTHICKNESS:0.135 MINIMUM INCHES AND 0.145 MAXIMUM INCHES;INSIDE DIAMETER:0.333 MINIMUM INCHES AND 0.337 MAXIMUM INCHES;
PART NAME ASSIGNED BY CONTROLLING AGENCYORIFICE
END ITEM IDENTIFICATIONFUEL AND ECS FUSELAGE
SUBSTITUTES & CROSS-REFERENCES 1
B001200P01008Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B001200P01008-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B001200P01008-5?
B001200P01008-5 is a RESTRICTOR,FLUID FLOW.
What parts can replace B001200P01008-5?
There is 1 known substitute for B001200P01008-5: B001200P01008. Substitute compatibility should be verified for your specific system.
What is the NSN for B001200P01008-5?
B001200P01008-5 is cataloged in the U.S. Government catalog under NSN 4730-01-706-0090. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B001200P01008-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.