PartsTable
Technical Data Sheet
Download PDF

B-3885-2 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

B-3885-2: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, end_radius: 0.188 INCHES NOMINAL IN, hole_diameter: 0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, overall_width: 0.750 INCHES NOMINAL IN, fork_span_width: 0.335 INCHES NOMINAL IN, surface_treatment: LACQUER OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-264-1564, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B-3885-2
NSN: 5340-01-264-1564
NIINs: 012641564, 015819166
FSC: 5340 — Hardware, Commercial
CAGE: 54184 — ARA, INC (USA)
SPECIFICATIONS
materialSTEEL COMP 630 OVERALL
end_radius0.188 INCHES NOMINAL IN
hole_diameter0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
overall_width0.750 INCHES NOMINAL IN
fork_span_width0.335 INCHES NOMINAL IN
surface_treatmentLACQUER OVERALL
fork_arm_thickness0.100 INCHES NOMINAL IN
rod_connection_bore_diameter0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
material_document_and_classificationAMS 5643,17-4PH ASSN STD SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyPLUG,LEAKPROOF SEAL
surface_treatment_document_and_classificationMIL-L-4615 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-264-1564
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B-3885-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.335 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.100 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-L-4615 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.188 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643,17-4PH ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: LACQUER OVERALL
•
ROD CONNECTION BORE DIAMETER: 0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.335 INCHES NOMINAL IN
FORK ARM THICKNESS0.100 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-L-4615 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS0.188 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643,17-4PH ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.750 INCHES NOMINAL IN
SURFACE TREATMENTLACQUER OVERALL
ROD CONNECTION BORE DIAMETER0.375 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
MATERIALSTEEL COMP 630 OVERALL
HOLE DIAMETER0.156 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy B-3885-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B-3885-2?
B-3885-2 is a CLEVIS,ROD END.
What is the NSN for B-3885-2?
B-3885-2 is cataloged in the U.S. Government catalog under NSN 5340-01-264-1564. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B-3885-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.