PartsTable
Technical Data Sheet
Download PDF

B-3142-1 — BEARING,BALL,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

B-3142-1: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY BALL, alignment_type: RIGID, overall_height: 0.6860 INCHES MINIMUM AND 0.6880 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: 4 POINT BALL CONTACT, bore_smallest_diameter: 6.5700 INCHES MINIMUM AND 6.5750 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-840-3009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B-3142-1
NSN: 3110-00-840-3009
NIINs: 008403009, 012166047
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 32828 — KAYDON CORPORATION DBA KAYDON CORP (USA)
SPECIFICATIONS
materialNICKEL ALLOY BALL
alignment_typeRIGID
overall_height0.6860 INCHES MINIMUM AND 0.6880 INCHES MAXIMUM IN
surface_finishGROUND
style_designator4 POINT BALL CONTACT
bore_smallest_diameter6.5700 INCHES MINIMUM AND 6.5750 INCHES MAXIMUM IN
overall_outside_diameter7.5690 INCHES MINIMUM AND 7.5700 INCHES MAXIMUM IN
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
thrust_directional_capability_designationSINGLE
NSN3110-00-840-3009
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: B-3142-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: 4 POINT BALL CONTACT
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 7.5690 INCHES MINIMUM AND 7.5700 INCHES MAXIMUM IN
•
BORE SMALLEST DIAMETER: 6.5700 INCHES MINIMUM AND 6.5750 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.6860 INCHES MINIMUM AND 0.6880 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATOR4 POINT BALL CONTACT
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER7.5690 INCHES MINIMUM AND 7.5700 INCHES MAXIMUM IN
BORE SMALLEST DIAMETER6.5700 INCHES MINIMUM AND 6.5750 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
MATERIALNICKEL ALLOY BALL
MATERIALSTEEL COMP E52100 ALL EXTERNAL/EXPOSED METAL SURFACES
SUBSTITUTES & CROSS-REFERENCES 3
65X12Reference document
Same NSN cross-reference
Reference document — Secondary reference
3110008403009Reference document
Same NSN cross-reference
Reference document — Secondary reference
8403009Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy B-3142-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B-3142-1?
B-3142-1 is a BEARING,BALL,THRUST.
What parts can replace B-3142-1?
There are 3 known substitutes for B-3142-1: 65X12, 3110008403009, 8403009. Substitute compatibility should be verified for your specific system.
What is the NSN for B-3142-1?
B-3142-1 is cataloged in the U.S. Government catalog under NSN 3110-00-840-3009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B-3142-1