B-3122-010 — Technical Data Sheet

✓ Verified by PartsTable

— · NUT WASHER

WHAT YOU NEED TO KNOW

Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration

Don't mix grades — weakens the joint

PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.550 INCHES MINIMUM AND 0.574 INCHES MAXIMUM IN, pin_overall_diameter: 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.016 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5315-00-011-7869, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

B-3122-010

NSN: 5315-00-011-7869
FSC: 5315
CAGE: 14541 — COOPER MACHINERY SERVICES LLC (USA)

SPECIFICATIONS

material	STEEL OVERALL
first_end_style	CHAMFERED
pin_overall_length	0.550 INCHES MINIMUM AND 0.574 INCHES MAXIMUM IN
pin_overall_diameter	0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
first_end_taper_angle	25.0 DEGREES NOMINAL
first_end_taper_length	0.016 INCHES NOMINAL IN
material_document_and_classification	QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_end	IDENTICAL
NSN	5315-00-011-7869

COMPONENT DIAGRAM

KEY FEATURES

•

SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL

•

FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

PIN OVERALL DIAMETER: 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN

•

FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN

•

MATERIAL: STEEL OVERALL

•

FIRST END STYLE: CHAMFERED

•

PIN OVERALL LENGTH: 0.550 INCHES MINIMUM AND 0.574 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

SECOND END RELATIONSHIP WITH FIRST END	IDENTICAL
FIRST END TAPER ANGLE	25.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER	0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
FIRST END TAPER LENGTH	0.016 INCHES NOMINAL IN
MATERIAL	STEEL OVERALL
FIRST END STYLE	CHAMFERED
PIN OVERALL LENGTH	0.550 INCHES MINIMUM AND 0.574 INCHES MAXIMUM IN

VERIFIED SUBSTITUTES & CROSS-REFERENCES 8

C54155InterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

54155InterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

10126InterchangeableGOVERNMENT REGISTRY

interchangeable cross-reference

interchangeable

B3122-10InterchangeableGOVERNMENT REGISTRY

Same NIIN cross-reference

interchangeable

184293InterchangeableGOVERNMENT REGISTRY

Same NIIN cross-reference

interchangeable

117869InterchangeableGOVERNMENT REGISTRY

Same NIIN cross-reference

interchangeable

LIFECYCLE

StatusACTIVEGOVERNMENT REGISTRY

AvailabilityOEM and secondary market

RoHS CompliantEAR99Not HAZMAT

Ready to buy B-3122-010?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is B-3122-010?

B-3122-010 is a PIN,STRAIGHT,HEADLESS.

What parts can replace B-3122-010?

There are 8 known substitutes for B-3122-010: C54155, 54155, 10126 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for B-3122-010?

B-3122-010 is cataloged in the Federal Logistics Information System under NSN 5315-00-011-7869. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

B-3122-010 — Technical Data Sheet

Request a Quote — B-3122-010