PartsTable
Technical Data Sheet
PartsTable / COMPONENT / B-1110-AID
B-1110-AID ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.6875 INCHES NOMINAL IN, overall_width: 0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-132-4730, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B-1110-AID
NSN: 3110-01-132-4730
FSC: 3110
CAGE: 5XMS1 — JTEKT BEARINGS NORTH AMERICA LLC DIV KBNA - ORD 1 (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.6875 INCHES NOMINAL IN
overall_width0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.8750 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-01-132-4730
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: B-1110-AID · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 0.6875 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 0.8750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER0.6875 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
MATERIALSTEEL OVERALL
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL WIDTH0.6150 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER0.8750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
FF-B-171Interchangeable
interchangeable cross-reference
interchangeable
SSRI-1438RA1P16LO1Interchangeable
interchangeable cross-reference
interchangeable
SR6DK25/7Interchangeable
interchangeable cross-reference
interchangeable
8500377-1Interchangeable
interchangeable cross-reference
interchangeable
B11-10Interchangeable
interchangeable cross-reference
interchangeable
8044-1AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy B-1110-AID?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B-1110-AID?
B-1110-AID is a BEARING,ROLLER,NEEDLE.
What parts can replace B-1110-AID?
There are 18 known substitutes for B-1110-AID: FF-B-171, SSRI-1438RA1P16LO1, SR6DK25/7 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B-1110-AID?
B-1110-AID is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-132-4730. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B-1110-AID

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026