PartsTable
Technical Data Sheet
PartsTable / COMPONENT / B 1034-13
B 1034-13 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, thread_class: 2B, overall_length: 4.840 INCHES NOMINAL IN, mounting_method: MOUNTING PLATE, handle_clearance: 1.220 INCHES NOMINAL IN, style_designator: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-023-7381, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
B 1034-13
NSN: 5340-01-023-7381
FSC: 5340
CAGE: 58712 — USECO AN AFFIL OF UNITED SERVICE EQUIPMENT CO (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
thread_class2B
overall_length4.840 INCHES NOMINAL IN
mounting_methodMOUNTING PLATE
handle_clearance1.220 INCHES NOMINAL IN
style_designatorROUND
surface_treatmentCHROMIUM OVERALL
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-01-023-7381
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: B 1034-13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 2
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.560 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
THREAD SERIES DESIGNATOR: UNF
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-N-290,CLASS 1,TYPE 4 FED SPEC 2ND TREATMENT RESPONSE OR QQ-C-320,CLASS 1,TYPE 1 FED SPEC 3RD TREATMENT RESPONSE OVERALL
•
HANDLE CLEARANCE: 1.220 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING FACILITY QUANTITY2
NOMINAL THREAD SIZE0.190 INCHES IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.560 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
THREAD SERIES DESIGNATORUNF
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-N-290,CLASS 1,TYPE 4 FED SPEC 2ND TREATMENT RESPONSE OR QQ-C-320,CLASS 1,TYPE 1 FED SPEC 3RD TREATMENT RESPONSE OVERALL
OVERALL LENGTH4.840 INCHES NOMINAL IN
HANDLE CLEARANCE1.220 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
B 1034-13Upgraded Successor
successor cross-reference
successor
K2620Interchangeable
interchangeable cross-reference
interchangeable
4DX8-331Interchangeable
interchangeable cross-reference
interchangeable
X8-331Interchangeable
interchangeable cross-reference
interchangeable
103413Interchangeable
interchangeable cross-reference
interchangeable
B-55022-1032-34Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy B 1034-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is B 1034-13?
B 1034-13 is a HANDLE,BOW.
What parts can replace B 1034-13?
There are 8 known substitutes for B 1034-13: B 1034-13, K2620, 4DX8-331 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for B 1034-13?
B 1034-13 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-023-7381. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — B 1034-13

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026