PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AXK5070
AXK5070 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OR STEEL COMP E50100 ROLLER, bore_diameter: 1.9700 INCHES MINIMUM AND 1.9770 INCHES MAXIMUM IN, outside_diameter: 2.7380 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM IN, special_features: BLACK OXIDE FINISH,EITHER SIDE OF RETAINER; BLACK OXIDE ON ID-OPTIONAL, style_designator: RETAINER AND ROLLERS, THRUST, rolling_element_diameter: 0.1177 INCHES MINIMUM AND 0.1181 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-155-2598, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AXK5070
NSN: 3110-01-155-2598
FSC: 3110
CAGE: 27737 — INA BEARING CO INC (USA)
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OR STEEL COMP E50100 ROLLER
bore_diameter1.9700 INCHES MINIMUM AND 1.9770 INCHES MAXIMUM IN
outside_diameter2.7380 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM IN
special_featuresBLACK OXIDE FINISH,EITHER SIDE OF RETAINER; BLACK OXIDE ON ID-OPTIONAL
style_designatorRETAINER AND ROLLERS, THRUST
retainer_piece_quantity1
rolling_element_diameter0.1177 INCHES MINIMUM AND 0.1181 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES ROLLER
NSN3110-01-155-2598
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AXK5070 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER PIECE QUANTITY: 1
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES ROLLER
•
OUTSIDE DIAMETER: 2.7380 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RETAINER AND ROLLERS, THRUST
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OR STEEL COMP E50100 ROLLER
•
ROLLING ELEMENT DIAMETER: 0.1177 INCHES MINIMUM AND 0.1181 INCHES MAXIMUM IN
•
BORE DIAMETER: 1.9700 INCHES MINIMUM AND 1.9770 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER PIECE QUANTITY1
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES ROLLER
SPECIAL FEATURESBLACK OXIDE FINISH,EITHER SIDE OF RETAINER; BLACK OXIDE ON ID-OPTIONAL
OUTSIDE DIAMETER2.7380 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM IN
STYLE DESIGNATORRETAINER AND ROLLERS, THRUST
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OR STEEL COMP E50100 ROLLER
ROLLING ELEMENT DIAMETER0.1177 INCHES MINIMUM AND 0.1181 INCHES MAXIMUM IN
BORE DIAMETER1.9700 INCHES MINIMUM AND 1.9770 INCHES MAXIMUM IN
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
R4112BInterchangeable
interchangeable cross-reference
interchangeable
1370-2Interchangeable
interchangeable cross-reference
interchangeable
TM1370-2Interchangeable
interchangeable cross-reference
interchangeable
L034252Interchangeable
interchangeable cross-reference
interchangeable
FFS92ANDTYPE1ANDSTYLE2SInterchangeable
interchangeable cross-reference
interchangeable
AH1201APInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AXK5070?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AXK5070?
AXK5070 is a BEARING,ROLLER,NEEDLE.
What parts can replace AXK5070?
There are 21 known substitutes for AXK5070: R4112B, 1370-2, TM1370-2 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AXK5070?
AXK5070 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-155-2598. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AXK5070

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026