PartsTable
Technical Data Sheet
Download PDF

AX-166886 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

AX-166886: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.258 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-216-5695, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AX-166886
NSN: 5310-01-216-5695
FSC: 5310 — Nuts and Washers
CAGE: K1866 — AEROQUIP-VICKERS LTD (GBR)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.258 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_size0.312 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch24
specification/standard_data62983-223500 MANUFACTURERS STANDARD
material_document_and_classificationVS 1-4-2-15 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-216-5695
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: AX-166886 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: VS 1-4-2-15 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
SPECIFICATION/STANDARD DATA: 62983-223500 MANUFACTURERS STANDARD
•
NUT HEIGHT: 0.258 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONVS 1-4-2-15 MFR REF SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
SPECIFICATION/STANDARD DATA62983-223500 MANUFACTURERS STANDARD
NUT HEIGHT0.258 INCHES MINIMUM AND 0.273 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH24
SUBSTITUTES & CROSS-REFERENCES 3
166886ENReference document
Same NSN cross-reference
Reference document — Secondary reference
223244Reference document
Same NSN cross-reference
Reference document — Secondary reference
166886Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AX-166886?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AX-166886?
AX-166886 is a NUT,PLAIN,HEXAGON.
What parts can replace AX-166886?
There are 3 known substitutes for AX-166886: 166886EN, 223244, 166886. Substitute compatibility should be verified for your specific system.
What is the NSN for AX-166886?
AX-166886 is cataloged in the U.S. Government catalog under NSN 5310-01-216-5695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AX-166886