PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AVP10S65-1032PC6C63
AVP10S65-1032PC6C63 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DEFLECTOR,DIRT AND LIQUID is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY, inside_diameter: 0.394 INCHES NOMINAL IN, outside_diameter: 0.844 INCHES NOMINAL IN, material_thickness: 0.187 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-529-4294, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AVP10S65-1032PC6C63
NSN: 5340-00-529-4294
FSC: 5340
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialNICKEL ALLOY
inside_diameter0.394 INCHES NOMINAL IN
outside_diameter0.844 INCHES NOMINAL IN
material_thickness0.187 INCHES NOMINAL IN
NSN5340-00-529-4294
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AVP10S65-1032PC6C63 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: NICKEL ALLOY
•
INSIDE DIAMETER: 0.394 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.187 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.844 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALNICKEL ALLOY
INSIDE DIAMETER0.394 INCHES NOMINAL IN
MATERIAL THICKNESS0.187 INCHES NOMINAL IN
OUTSIDE DIAMETER0.844 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
2-3FPC57Interchangeable
interchangeable cross-reference
interchangeable
2-1JPC57Interchangeable
interchangeable cross-reference
interchangeable
3-2KPC57Interchangeable
interchangeable cross-reference
interchangeable
S-535Interchangeable
interchangeable cross-reference
interchangeable
NM-174Interchangeable
interchangeable cross-reference
interchangeable
S-535PIECE50Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AVP10S65-1032PC6C63?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AVP10S65-1032PC6C63?
AVP10S65-1032PC6C63 is a DEFLECTOR,DIRT AND LIQUID.
What parts can replace AVP10S65-1032PC6C63?
There are 18 known substitutes for AVP10S65-1032PC6C63: 2-3FPC57, 2-1JPC57, 3-2KPC57 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AVP10S65-1032PC6C63?
AVP10S65-1032PC6C63 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-529-4294. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AVP10S65-1032PC6C63

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026