ATC100B101KMS500X — CAPACITOR,FIXED,GLASS DIELECTRIC

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

ATC100B101KMS500X: CAPACITOR,FIXED,GLASS DIELECTRIC.

CAPACITOR,FIXED,GLASS DIELECTRIC. Key specifications include material: CERAMIC CASE, body_style: CHIP TYPE WITH TAPE TERMINALS, body_width: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, body_height: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, body_length: 0.110 INCHES MAXIMUM IN, terminal_length: 0.250 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-035-5853, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ ATC100B101KMS500X

NSN: 5910-01-035-5853
FSC: 5910 — Capacitors
CAGE: 29990 — AMERICAN TECHNICAL CERAMICS CORP DBA ATC (USA)

SPECIFICATIONS

material	CERAMIC CASE
body_style	CHIP TYPE WITH TAPE TERMINALS
body_width	0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
body_height	0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
body_length	0.110 INCHES MAXIMUM IN
terminal_length	0.250 INCHES MINIMUM IN
features_provided	HERMETICALLY SEALED CASE
terminal_diameter	0.003 INCHES MINIMUM AND 0.005 INCHES MAXIMUM IN
reliability_indicator	NOT ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 RIBBON
NSN	5910-01-035-5853

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL DIAMETER: 0.003 INCHES MINIMUM AND 0.005 INCHES MAXIMUM IN

•

TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: 90.0 SINGLE SECTION

•

BODY STYLE: CHIP TYPE WITH TAPE TERMINALS

•

TOLERANCE RANGE PER SECTION: -10.00 TO 10.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 0.250 INCHES MINIMUM IN

•

BODY WIDTH: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

TERMINAL DIAMETER	0.003 INCHES MINIMUM AND 0.005 INCHES MAXIMUM IN
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS	90.0 SINGLE SECTION
BODY STYLE	CHIP TYPE WITH TAPE TERMINALS
TOLERANCE RANGE PER SECTION	-10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	0.250 INCHES MINIMUM IN
BODY WIDTH	0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
BODY HEIGHT	0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
FEATURES PROVIDED	HERMETICALLY SEALED CASE

SUBSTITUTES & CROSS-REFERENCES 1

ATC100B10-1KMSReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy ATC100B101KMS500X?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is ATC100B101KMS500X?

ATC100B101KMS500X is a CAPACITOR,FIXED,GLASS DIELECTRIC. It is classified as a MRO (MRO_GENERAL).

What parts can replace ATC100B101KMS500X?

There is 1 known substitute for ATC100B101KMS500X: ATC100B10-1KMS. Substitute compatibility should be verified for your specific system.

What is the NSN for ATC100B101KMS500X?

ATC100B101KMS500X is cataloged in the U.S. Government catalog under NSN 5910-01-035-5853. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

ATC100B101KMS500X — CAPACITOR,FIXED,GLASS DIELECTRIC

Request a Quote — ATC100B101KMS500X