PartsTable
Technical Data Sheet
Download PDF

AT06-2S-CAP — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AT06-2S-CAP: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include overall_width: 23.08 MILLIMETERS NOMINAL MM, overall_height: 21.00 MILLIMETERS NOMINAL MM, overall_length: 34.2 MILLIMETERS NOMINAL MM, special_features: THERMOPLASTIC, BLACK, TEMP -55 DEG - 125 DEG C DEGC, end_item_identification: 017031867, part_name_assigned_by_controlling_agency: PROTECTIVE CAP, 2 POSITION, AT-SERIES. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-729-2472, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AT06-2S-CAP
NSN: 5340-01-729-2472
FSC: 5340 — Hardware, Commercial
CAGE: 1GK44 — SINE SYSTEMS CORPORATION (USA)
SPECIFICATIONS
overall_width23.08 MILLIMETERS NOMINAL MM
overall_height21.00 MILLIMETERS NOMINAL MM
overall_length34.2 MILLIMETERS NOMINAL MM
special_featuresTHERMOPLASTIC, BLACK, TEMP -55 DEG - 125 DEG C DEGC
end_item_identification017031867
part_name_assigned_by_controlling_agencyPROTECTIVE CAP, 2 POSITION, AT-SERIES
NSN5340-01-729-2472
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AT06-2S-CAP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT21.00 MILLIMETERS NOMINAL MM
OVERALL LENGTH34.2 MILLIMETERS NOMINAL MM
OVERALL WIDTH23.08 MILLIMETERS NOMINAL MM
SPECIAL FEATURESTHERMOPLASTIC, BLACK, TEMP -55 DEG - 125 DEG C DEGC
PART NAME ASSIGNED BY CONTROLLING AGENCYPROTECTIVE CAP, 2 POSITION, AT-SERIES
END ITEM IDENTIFICATION017031867
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
12685132Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AT06-2S-CAP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AT06-2S-CAP?
AT06-2S-CAP is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace AT06-2S-CAP?
There is 1 known substitute for AT06-2S-CAP: 12685132. Substitute compatibility should be verified for your specific system.
What is the NSN for AT06-2S-CAP?
AT06-2S-CAP is cataloged in the U.S. Government catalog under NSN 5340-01-729-2472. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AT06-2S-CAP