PartsTable
Technical Data Sheet
Download PDF

AT-2008 — TAPPET,ENGINE POPPET VALVE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

AT-2008: TAPPET,ENGINE POPPET VALVE.

The TAPPET,ENGINE POPPET VALVE is a the manufacturer industrial component. Key specifications include material: PLASTIC EPOXY, physical_form: FILM, specific_usage_design: FOR BONDING LIQUID CRYSTAL DISPLAYS (LCDS), supplementary_features: ONE 12 IN. X 12 IN.

SHEET IN. This part is cataloged in the U.S. Government catalog under NSN 2805-00-492-9785, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AT-2008
NSN: 2805-00-492-9785
NIINs: 004929785, 011723258
FSC: 2805 — Gasoline Reciprocating Engines, Except Aircraft; and Components
CAGE: 45225 — BOSCH AUTOMOTIVE SERVICE SOLUTIONS INC. (USA)
SPECIFICATIONS
materialPLASTIC EPOXY
physical_formFILM
special_features12 X 12 IN. SHEET; 0.005 IN. THICKNESS; POLYESTER FILM CARRIER; ONE SIDE TACKY; MUST BE SHIPPED AND STORED AT MINUS 40 DEG C IN
specific_usage_designFOR BONDING LIQUID CRYSTAL DISPLAYS (LCDS)
supplementary_featuresONE 12 IN. X 12 IN. SHEET IN
NSN2805-00-492-9785
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available TAPPET,ENGINE POPPET VALVE TITLE COMPONENT PN AT-2008 MFR TAPPET,ENGINE POPPET V
KEY FEATURES
•
CAM END DIAMETER: 0.748 INCHES NOMINAL IN
•
WIDTH ACROSS FLATS: 0.562 INCHES NOMINAL IN
•
CONCENTRIC HOLE DEPTH: 1.750 INCHES NOMINAL IN
•
BODY OUTSIDE DIAMETER: 0.688 INCHES NOMINAL IN
•
STYLE DESIGNATOR: INTERNAL THREAD AND WRENCHING FLATS PUSH ROD END
•
METALLIC HARDNESS RATING AND LOCATION: 50.0 ROCKWELL C MINIMUM OVERALL
•
FLATS LENGTH: 0.219 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CAM END DIAMETER0.748 INCHES NOMINAL IN
WIDTH ACROSS FLATS0.562 INCHES NOMINAL IN
CONCENTRIC HOLE DEPTH1.750 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER0.688 INCHES NOMINAL IN
STYLE DESIGNATORINTERNAL THREAD AND WRENCHING FLATS PUSH ROD END
METALLIC HARDNESS RATING AND LOCATION50.0 ROCKWELL C MINIMUM OVERALL
OVERALL LENGTH1.950 INCHES NOMINAL IN
FLATS LENGTH0.219 INCHES NOMINAL IN
ADJUSTABILITYADJUSTABLE
CAM END HEIGHT1.150 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
115-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
115A6Reference document
Same NSN cross-reference
Reference document — Secondary reference
010061Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy AT-2008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AT-2008?
AT-2008 is a TAPPET,ENGINE POPPET VALVE.
What parts can replace AT-2008?
There are 3 known substitutes for AT-2008: 115-6, 115A6, 010061. Substitute compatibility should be verified for your specific system.
What is the NSN for AT-2008?
AT-2008 is cataloged in the U.S. Government catalog under NSN 2805-00-492-9785. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AT-2008

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.