PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ASTM-D735GRADE SB910A1BE1F1
ASTM-D735GRADE SB910A1BE1F1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hardness_rating: 90.0 SHORE DUROMETER A NOMINAL OVERALL, outside_diameter: 5.840 INCHES MINIMUM AND 5.870 INCHES MAXIMUM IN, special_features: DWR 00147 SHAPE 1 STYLE 33, style_designator: CIRCULAR, aperture_diameter: 5.250 INCHES NOMINAL IN, cross-sectional_thickness: 0.063 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-916-4317, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASTM-D735GRADE SB910A1BE1F1
NSN: 5330-00-916-4317
FSC: 5330
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
hardness_rating90.0 SHORE DUROMETER A NOMINAL OVERALL
outside_diameter5.840 INCHES MINIMUM AND 5.870 INCHES MAXIMUM IN
special_featuresDWR 00147 SHAPE 1 STYLE 33
style_designatorCIRCULAR
aperture_diameter5.250 INCHES NOMINAL IN
cross-sectional_thickness0.063 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D2000 2BG910A1BEAF1 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5330-00-916-4317
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ASTM-D735GRADE SB910A1BE1F1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.063 INCHES NOMINAL IN
•
APERTURE DIAMETER: 5.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BG910A1BEAF1 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 5.840 INCHES MINIMUM AND 5.870 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.063 INCHES NOMINAL IN
APERTURE DIAMETER5.250 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BG910A1BEAF1 ASSN STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER5.840 INCHES MINIMUM AND 5.870 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
SPECIAL FEATURESDWR 00147 SHAPE 1 STYLE 33
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
500310M1Interchangeable
interchangeable cross-reference
interchangeable
48852Interchangeable
interchangeable cross-reference
interchangeable
33209Interchangeable
interchangeable cross-reference
interchangeable
AFB1286CInterchangeable
interchangeable cross-reference
interchangeable
00147Interchangeable
interchangeable cross-reference
interchangeable
948-475PC54Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ASTM-D735GRADE SB910A1BE1F1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASTM-D735GRADE SB910A1BE1F1?
ASTM-D735GRADE SB910A1BE1F1 is a GASKET.
What parts can replace ASTM-D735GRADE SB910A1BE1F1?
There are 20 known substitutes for ASTM-D735GRADE SB910A1BE1F1: 500310M1, 48852, 33209 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASTM-D735GRADE SB910A1BE1F1?
ASTM-D735GRADE SB910A1BE1F1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-916-4317. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASTM-D735GRADE SB910A1BE1F1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026