Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include length: 90.000 FEET NOMINAL FT, material: COPPER ALLOY 130, heat_treatment: LIGHT ANNEALED, basic_shape_style: FLAT, cross-sectional_width: 0.940 INCHES NOMINAL IN, weight_per_unit_measure: 0.984 POUNDS PER LINEAR FOOT LBS. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-404-6264, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
ASTM-B152/B152M
NSN:5330-00-404-6264 FSC:5330 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
length
90.000 FEET NOMINAL FT
material
COPPER ALLOY 130
heat_treatment
LIGHT ANNEALED
basic_shape_style
FLAT
cross-sectional_width
0.940 INCHES NOMINAL IN
weight_per_unit_measure
0.984 POUNDS PER LINEAR FOOT LBS
cross-sectional_thickness
0.0030 INCHES NOMINAL IN
nondefinitive_spec/std_data
LIGHT ANNEALED TEMPER
material_document_and_classification
QQ-C-576 FED SPEC 1ST MATERIAL RESPONSE
NSN
5330-00-404-6264
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
CROSS-SECTIONAL THICKNESS: 0.012 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 2.984 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.312 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY 110 OR COPPER ALLOY 125 OR COPPER ALLOY 122 OR COPPER ALLOY 102 OR COPPER ALLOY 116 OR COPPER ALLOY 105 OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-576,CR,SOFT ANNEALED FED SPEC ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE
RECTANGULAR METAL
CROSS-SECTIONAL THICKNESS
0.012 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
APERTURE DIAMETER
2.984 INCHES NOMINAL IN
OUTSIDE DIAMETER
3.312 INCHES NOMINAL IN
MATERIAL
COPPER ALLOY 110 OR COPPER ALLOY 125 OR COPPER ALLOY 122 OR COPPER ALLOY 102 OR COPPER ALLOY 116 OR COPPER ALLOY 105 OVERALL
STYLE DESIGNATOR
CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-C-576,CR,SOFT ANNEALED FED SPEC ALL MATERIAL RESPONSES OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASTM-B152/B152M?
ASTM-B152/B152M is a GASKET.
What parts can replace ASTM-B152/B152M?
There are 9 known substitutes for ASTM-B152/B152M: ASTM B152, QQC576C0LDR0LLED, QQ-C-576 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASTM-B152/B152M?
ASTM-B152/B152M is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-404-6264. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.