PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ASTM D 2475
ASTM D 2475 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FELT,MECHANICAL,PREFORMED is a the manufacturer industrial component. Key specifications include color: WHITE BACKGROUND, width: 60.000 INCHES NOMINAL IN, fiber_material: UNABLE TO DECODE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-205-1390, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASTM D 2475
NSN: 5330-00-205-1390
FSC: 5330
CAGE: 81346 — AMERICAN SOCIETY FOR TESTING AND MATERIALS DBA ASTM INTERNATIONAL (USA)
SPECIFICATIONS
colorWHITE BACKGROUND
width60.000 INCHES NOMINAL IN
fiber_materialUNABLE TO DECODE
NSN5330-00-205-1390
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ASTM D 2475 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.250 INCHES NOMINAL IN
•
MATERIAL: WOOL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.250 INCHES NOMINAL IN
OVERALL WIDTH0.250 INCHES NOMINAL IN
MATERIALWOOL OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE
SPECIAL FEATURESENDS MUST BE CUT ON 60 DEG ANGLE FROM CORNER AND DEPARALLEL W/EACH OTHER
OVERALL LENGTH20.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
C-F-206 TY1Interchangeable
interchangeable cross-reference
interchangeable
C-F-206Interchangeable
interchangeable cross-reference
interchangeable
ASTM D2475Interchangeable
interchangeable cross-reference
interchangeable
IGH28Interchangeable
interchangeable cross-reference
interchangeable
GPW12133Interchangeable
interchangeable cross-reference
interchangeable
21790Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ASTM D 2475?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASTM D 2475?
ASTM D 2475 is a FELT,MECHANICAL,PREFORMED.
What parts can replace ASTM D 2475?
There are 13 known substitutes for ASTM D 2475: C-F-206 TY1, C-F-206, ASTM D2475 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASTM D 2475?
ASTM D 2475 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-205-1390. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASTM D 2475

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026