PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ASP-4
ASP-4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MUFFLER,EXHAUST is a the manufacturer industrial component. Key specifications include overall_length: 1.875 INCHES NOMINAL IN, overall_diameter: 0.875 INCHES NOMINAL IN, end_item_identification: FLEXOR HOUSING ASSY 1600135-1, part_name_assigned_by_controlling_agency: PNEUMATIC EXHAUST MUFFLER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-7717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASP-4
NSN: 5340-00-582-7717
FSC: 5340
CAGE: 59211 — PARKER-HANNIFIN CORPORATION DBA SERVICE AND SUPPORT OPERATION DIV SERVICES AND SUPPORT OPERATIONS (USA)
SPECIFICATIONS
overall_length1.875 INCHES NOMINAL IN
overall_diameter0.875 INCHES NOMINAL IN
end_item_identificationFLEXOR HOUSING ASSY 1600135-1
part_name_assigned_by_controlling_agencyPNEUMATIC EXHAUST MUFFLER
NSN5340-00-582-7717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ASP-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.625 INCHES NOMINAL IN
•
THREAD CLASS: 3A A
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 7/16-20 UNF
•
SURFACE TREATMENT: ANODIZE
•
FEATURES PROVIDED: BEVELED SEAT AND SHOULDER
•
DESIGN TYPE: THREADED
•
DRIVE TYPE: SERRATED
•
MATERIAL: ALUMINUM
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.625 INCHES NOMINAL IN
THREAD CLASS3A A
THREAD SIZE AND SERIES/TYPE DESIGNATOR7/16-20 UNF
SURFACE TREATMENTANODIZE
FEATURES PROVIDEDBEVELED SEAT AND SHOULDER
DESIGN TYPETHREADED
DRIVE TYPESERRATED
MATERIALALUMINUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
P4Upgraded Successor
successor cross-reference
successor
10117462Upgraded Successor
successor cross-reference
successor
29073Upgraded Successor
successor cross-reference
successor
5006-8Interchangeable
interchangeable cross-reference
interchangeable
5006-8NInterchangeable
interchangeable cross-reference
interchangeable
A5778Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ASP-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASP-4?
ASP-4 is a MUFFLER,EXHAUST.
What parts can replace ASP-4?
There are 15 known substitutes for ASP-4: P4, 10117462, 29073 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASP-4?
ASP-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-582-7717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASP-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026