PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ASNA2397JD416
ASNA2397JD416 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, thickness: 0.063 INCHES NOMINAL IN, hole_diameter: 0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN, overall_diameter: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, surface_treatment: CHROMATE OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-115-3435, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASNA2397JD416
NSN: 5310-01-115-3435
FSC: 5310
CAGE: F6198 — AIRBUS OPERATIONS (FRA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
thickness0.063 INCHES NOMINAL IN
hole_diameter0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
overall_diameter0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
surface_treatmentCHROMATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataA TYPE AND 1 GRADE AND D CLASS
material_document_and_classificationQQ-A-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-115-3435
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ASNA2397JD416 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: CHROMATE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 1 GRADE AND D CLASS
•
THICKNESS: 0.063 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCHROMATE OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 1 GRADE AND D CLASS
THICKNESS0.063 INCHES NOMINAL IN
OVERALL DIAMETER0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2024 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5,TEMPER T3 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/5,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
160-1040-03-01-00Interchangeable
interchangeable cross-reference
interchangeable
10-109-3-01Interchangeable
interchangeable cross-reference
interchangeable
1040-3Interchangeable
interchangeable cross-reference
interchangeable
5310PL0153165Interchangeable
Same NIIN cross-reference
interchangeable
AN960JD416Interchangeable
Same NIIN cross-reference
interchangeable
FF-W-92Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ASNA2397JD416?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASNA2397JD416?
ASNA2397JD416 is a WASHER,FLAT.
What parts can replace ASNA2397JD416?
There are 6 known substitutes for ASNA2397JD416: 160-1040-03-01-00, 10-109-3-01, 1040-3 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASNA2397JD416?
ASNA2397JD416 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-115-3435. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASNA2397JD416

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026