PartsTable
Technical Data Sheet
Download PDF

ASME B 18.6.3 — SCREW,MACHINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

ASME B 18.6.3: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.097 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.270 INCHES NOMINAL IN, thread_length: 0.750 INCHES NOMINAL IN, screw_material: COPPER ALLOY. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-010-3091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASME B 18.6.3
NSN: 5310-00-010-3091
NIINs: 000103091, 000598256, 002063713, 002557736, 005501467, 005792097, 009527756, 009576269, 009585248, 009585249, 009846210, 009846211, 009881729, 015560012, 015571008, 015985257, 016306229, 016306243, 016306250, 016306260, 016306312, 016842830, 017177807
FSC: 5310 — Nuts and Washers
CAGE: 05047 — THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (USA)
SPECIFICATIONS
head_stylePAN
head_height0.097 INCHES NOMINAL IN
thread_class2A A
head_diameter0.270 INCHES NOMINAL IN
thread_length0.750 INCHES NOMINAL IN
screw_materialCOPPER ALLOY
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch32
NSN5310-00-010-3091
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: ASME B 18.6.3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 13 STYLE AND 2B CLASS
•
NUT HEIGHT: 0.114 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 13 STYLE AND 2B CLASS
NUT HEIGHT0.114 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH32
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
103091Reference document
Same NSN cross-reference
Reference document — Secondary reference
B18.6.3Reference document
Same NSN cross-reference
Reference document — Secondary reference
901309Reference document
Same NSN cross-reference
Reference document — Secondary reference
34051SReference document
Same NSN cross-reference
Reference document — Secondary reference
FF-N-836 TY2ST13CL2BReference document
Same NSN cross-reference
Reference document — Secondary reference
FF-N-836Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy ASME B 18.6.3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASME B 18.6.3?
ASME B 18.6.3 is a SCREW,MACHINE.
What parts can replace ASME B 18.6.3?
There are 7 known substitutes for ASME B 18.6.3: 103091, B18.6.3, 901309 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASME B 18.6.3?
ASME B 18.6.3 is cataloged in the U.S. Government catalog under NSN 5310-00-010-3091. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASME B 18.6.3