PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ASME 16.11
ASME 16.11 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The ASME 16.11 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-892-5660, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASME 16.11
NSN: 4730-00-892-5660
FSC: 4730
CAGE: 05047 — THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS (USA)
SPECIFICATIONS
Part NumberASME 16.11
NSN4730-00-892-5660
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: ASME 16.11 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE OUTSIDE
•
CONNECTION TYPE: UNTHREADED INTERNAL PIPE FIRST END
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18170,COMP 304,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PIPE WALL THICKNESS DESIGNATION FOR WHICH DESIGNED: SCHEDULE 80S FIRST END
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
FLOW ANGLE: 90.0 DEGREES
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE OUTSIDE
SURFACE TREATMENTPASSIVATE INSIDE
CONNECTION TYPEUNTHREADED INTERNAL PIPE FIRST END
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18170,COMP 304,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PIPE WALL THICKNESS DESIGNATION FOR WHICH DESIGNEDSCHEDULE 80S FIRST END
OPERATING PRESSURE3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
FLOW ANGLE90.0 DEGREES
MATERIALSTEEL OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY NOMINAL PIPE SIZE0.500 IN. UNBORED SOCKETS AND MATERIAL REQUIREMENTS IN
SPECIFICATION/STANDARD DATA05047-ASME 16.11 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
M31080Interchangeable
interchangeable cross-reference
interchangeable
31080Interchangeable
interchangeable cross-reference
interchangeable
3100-0058Interchangeable
interchangeable cross-reference
interchangeable
143054H1Interchangeable
interchangeable cross-reference
interchangeable
18209CHANGE16761Interchangeable
interchangeable cross-reference
interchangeable
90-FC33260Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ASME 16.11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASME 16.11?
ASME 16.11 is a ASME 16.11.
What parts can replace ASME 16.11?
There are 14 known substitutes for ASME 16.11: M31080, 31080, 3100-0058 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASME 16.11?
ASME 16.11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-892-5660. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASME 16.11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026