PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ASIDP4106
ASIDP4106 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC AND RUBBER SYNTHETIC OVERALL, temp_rating: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF, special_features: FURNISHED WITH ONE O-RING SPREADER, peripheral_diameter: 2.250 INCHES NOMINAL IN, center_hole_diameter: 1.875 INCHES NOMINAL IN, cross-sectional_height: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-032-8598, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASIDP4106
NSN: 5330-01-032-8598
FSC: 5330
CAGE: 51214 — AEROSPACE SUPPLY, INC DIV ASI MARINE & INDUSTRIAL (USA)
SPECIFICATIONS
materialPLASTIC AND RUBBER SYNTHETIC OVERALL
temp_rating-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
special_featuresFURNISHED WITH ONE O-RING SPREADER
peripheral_diameter2.250 INCHES NOMINAL IN
center_hole_diameter1.875 INCHES NOMINAL IN
cross-sectional_height0.375 INCHES NOMINAL IN
cross-sectional_shape_styleU
NSN5330-01-032-8598
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ASIDP4106 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: U
•
CENTER HOLE DIAMETER: 1.875 INCHES NOMINAL IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
•
MATERIAL: PLASTIC AND RUBBER SYNTHETIC OVERALL
•
PERIPHERAL DIAMETER: 2.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEU
CENTER HOLE DIAMETER1.875 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
MATERIALPLASTIC AND RUBBER SYNTHETIC OVERALL
SPECIAL FEATURESFURNISHED WITH ONE O-RING SPREADER
PERIPHERAL DIAMETER2.250 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
3177-2Interchangeable
interchangeable cross-reference
interchangeable
10015366-060Interchangeable
interchangeable cross-reference
interchangeable
C-430-14Interchangeable
interchangeable cross-reference
interchangeable
613270Interchangeable
interchangeable cross-reference
interchangeable
21509NInterchangeable
interchangeable cross-reference
interchangeable
21509N GRP3 PC21Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ASIDP4106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASIDP4106?
ASIDP4106 is a PACKING,PREFORMED.
What parts can replace ASIDP4106?
There are 11 known substitutes for ASIDP4106: 3177-2, 10015366-060, C-430-14 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASIDP4106?
ASIDP4106 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-032-8598. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASIDP4106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026