PartsTable / COMPONENT / ASEL1001-1
ASEL1001-1
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: RECESSED, seal_width: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, outside_diameter: 2.879 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-019-3233, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
ASEL1001-1
NSN: 5330-01-019-3233 FSC: 5330 CAGE: 28953 — RIX INDUSTRIES (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT case_style RECESSED seal_width 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN outside_diameter 2.879 INCHES NOMINAL IN surface_treatment PLASTIC CASE housing_bore_diameter 2.875 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 2.125 INCHES NOMINAL IN NSN 5330-01-019-3233
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: ASEL1001-1
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 2.879 INCHES NOMINAL IN
• ACCOMMODATED SHAFT DIAMETER: 2.125 INCHES NOMINAL IN
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• HOUSING BORE DIAMETER: 2.875 INCHES NOMINAL IN
• SEAL WIDTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
• SURFACE TREATMENT: PLASTIC CASE
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 2.879 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 2.125 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT HOUSING BORE DIAMETER 2.875 INCHES NOMINAL IN SEAL WIDTH 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN SURFACE TREATMENT PLASTIC CASE SEALING ELEMENT STYLE ANGULAR CASE STYLE RECESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
19 Interchangeable interchangeable cross-reference
interchangeable
21101 Interchangeable interchangeable cross-reference
interchangeable
400S3 Interchangeable interchangeable cross-reference
interchangeable
UV400S3 Interchangeable interchangeable cross-reference
interchangeable
B107.100 Interchangeable interchangeable cross-reference
interchangeable
6101102 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy ASEL1001-1?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASEL1001-1?
ASEL1001-1 is a SEAL,PLAIN ENCASED.
What parts can replace ASEL1001-1?
There are 17 known substitutes for ASEL1001-1: 19, 21101, 400S3 and 14 more. Substitute compatibility should be verified for your specific system.
Is ASEL1001-1 still available?
ASEL1001-1 is currently cancelled.
Request a Quote — ASEL1001-1