PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ASBG9SP11
ASBG9SP11 ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING,PLAIN,SELF-ALIGNING is a the manufacturer industrial component. Key specifications include material: GREASE AND LUBRICANT DRY FILM LUBRICATION, bore_diameter: 0.5620 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN, style_designator: WITHOUT INSERT OR LINER WITH STAKING GROOVE, inner_member_width: 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN, outer_member_width: 0.4320 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM IN, static_radial_load_rating: 13050 POUNDS LBS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-071-0461, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASBG9SP11
NSN: 3120-01-071-0461
FSC: 3120
CAGE: 15860 — NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION (USA)
SPECIFICATIONS
materialGREASE AND LUBRICANT DRY FILM LUBRICATION
bore_diameter0.5620 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
style_designatorWITHOUT INSERT OR LINER WITH STAKING GROOVE
inner_member_width0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
outer_member_width0.4320 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM IN
static_radial_load_rating13050 POUNDS LBS
outer_member_outside_diameter1.0932 INCHES MINIMUM AND 1.0937 INCHES MAXIMUM IN
material_document_and_classificationMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
NSN3120-01-071-0461
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: ASBG9SP11 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER MEMBER WIDTH: 0.4320 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
•
MATERIAL: GREASE AND LUBRICANT DRY FILM LUBRICATION
•
STATIC RADIAL LOAD RATING: 13050 POUNDS LBS
•
OUTER MEMBER OUTSIDE DIAMETER: 1.0932 INCHES MINIMUM AND 1.0937 INCHES MAXIMUM IN
•
INNER MEMBER WIDTH: 0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: WITHOUT INSERT OR LINER WITH STAKING GROOVE
•
BORE DIAMETER: 0.5620 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTER MEMBER WIDTH0.4320 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION
MATERIALGREASE AND LUBRICANT DRY FILM LUBRICATION
STATIC RADIAL LOAD RATING13050 POUNDS LBS
OUTER MEMBER OUTSIDE DIAMETER1.0932 INCHES MINIMUM AND 1.0937 INCHES MAXIMUM IN
INNER MEMBER WIDTH0.5570 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM IN
STYLE DESIGNATORWITHOUT INSERT OR LINER WITH STAKING GROOVE
BORE DIAMETER0.5620 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
55205Interchangeable
interchangeable cross-reference
interchangeable
18015382Interchangeable
interchangeable cross-reference
interchangeable
R55205Interchangeable
interchangeable cross-reference
interchangeable
18009049Interchangeable
interchangeable cross-reference
interchangeable
GB14D9Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ASBG9SP11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASBG9SP11?
ASBG9SP11 is a BEARING,PLAIN,SELF-ALIGNING.
What parts can replace ASBG9SP11?
There are 5 known substitutes for ASBG9SP11: 55205, 18015382, R55205 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASBG9SP11?
ASBG9SP11 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-071-0461. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASBG9SP11

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026