PartsTable
Technical Data Sheet
PartsTable / COMPONENT / ASA100
ASA100 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CHAIN,ROLLER is a the manufacturer industrial component. Key specifications include material: STEEL, special_features: WEAPON SYSTEM ESSENTIAL, pin_fastening_method: COTTER PIN, first_chain_link_style: ROLLER, nominal_pitch_distance: 1.250 INCHES IN, second_chain_link_style: PIN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-027-1721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
ASA100
NSN: 5330-00-027-1721
FSC: 5330
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialSTEEL
special_featuresWEAPON SYSTEM ESSENTIAL
link_row_quantity1
pin_fastening_methodCOTTER PIN
first_chain_link_styleROLLER
nominal_pitch_distance1.250 INCHES IN
second_chain_link_stylePIN
minimum_tensile_strength9500 POUNDS PER SQUARE INCH LBS
first_chain_link_plate_width1.188 INCHES NOMINAL IN
second_chain_link_plate_width1.0250 INCHES NOMINAL IN
criticality_code_justificationFEAT
second_chain_link_pin_nominal_diameter0.3750 INCHES IN
NSN5330-00-027-1721
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: ASA100 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 21.475 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.275 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 21.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER21.475 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL OVERALL
CROSS-SECTIONAL THICKNESS0.275 INCHES NOMINAL IN
OUTSIDE DIAMETER21.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
BU6-64CInterchangeable
interchangeable cross-reference
interchangeable
100Interchangeable
interchangeable cross-reference
interchangeable
XX6-64CInterchangeable
interchangeable cross-reference
interchangeable
2155532Interchangeable
Same NIIN cross-reference
interchangeable
0-2620MODInterchangeable
Same NIIN cross-reference
interchangeable
132795-0Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy ASA100?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is ASA100?
ASA100 is a CHAIN,ROLLER.
What parts can replace ASA100?
There are 6 known substitutes for ASA100: BU6-64C, 100, XX6-64C and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for ASA100?
ASA100 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-027-1721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — ASA100

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026