PartsTable
Technical Data Sheet
Download PDF

AS9585 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

AS9585: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, hole_type: DRILLED, head_style: HEXAGON, grip_length: 0.315 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, head_height: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-379-0542, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS9585
NSN: 5306-01-379-0542
FSC: 5306 — Bolts
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
hole_typeDRILLED
head_styleHEXAGON
grip_length0.315 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
head_height0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
thread_class3A A
hole_diameter0.070 INCHES NOMINAL IN
hole_quantity6
thread_length0.905 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES GRIP
fastener_length1.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
NSN5306-01-379-0542
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: AS9585 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES GRIP
•
HEAD HEIGHT: 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.905 INCHES NOMINAL IN
•
HOLE CONFIGURATION STYLE: HEXAGON FLATS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES HEAD
HEAD HEIGHT0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
FASTENER LENGTH1.250 INCHES NOMINAL IN
THREAD LENGTH0.905 INCHES NOMINAL IN
HOLE CONFIGURATION STYLEHEXAGON FLATS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 1
MS9585-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AS9585?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS9585?
AS9585 is a BOLT,MACHINE.
What parts can replace AS9585?
There is 1 known substitute for AS9585: MS9585-16. Substitute compatibility should be verified for your specific system.
What is the NSN for AS9585?
AS9585 is cataloged in the U.S. Government catalog under NSN 5306-01-379-0542. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS9585