PartsTable
Technical Data Sheet
PartsTable / O-RING / AS9385
AS9385 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.694 INCHES NOMINAL IN, center_hole_diameter: 0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-235-3183, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS9385
NSN: 5331-01-235-3183
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.694 INCHES NOMINAL IN
center_hole_diameter0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.079 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
NSN5331-01-235-3183
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS9385 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SILICONE CLASS Q
•
TEMP RATING: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 0.694 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.079 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SILICONE CLASS Q
TEMP RATING-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER0.694 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.079 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
MS9385-05Interchangeable
interchangeable cross-reference
interchangeable
MS9385-06ESInterchangeable
interchangeable cross-reference
interchangeable
MS9385-06Interchangeable
interchangeable cross-reference
interchangeable
MS9385-11Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS9386Interchangeable
interchangeable cross-reference
interchangeable
MS9385-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS9385?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS9385?
AS9385 is a O-RING.
What parts can replace AS9385?
There are 21 known substitutes for AS9385: MS9385-05, MS9385-06ES, MS9385-06 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS9385?
AS9385 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-235-3183. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS9385

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026