PartsTable
Technical Data Sheet
Download PDF

AS9144 — MODIFICATION KIT,GUN,WEAPON

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS9144: MODIFICATION KIT,GUN,WEAPON.

The MODIFICATION KIT,GUN,WEAPON is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.000 INCHES NOMINAL IN, overall_length: 3.578 INCHES NOMINAL IN, aperture_diameter: 1.396 INCHES MINIMUM AND 1.416 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-074-4017, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS9144
NSN: 5330-00-074-4017
NIINs: 000744017, 011688280
FSC: 5330 — Packing and Gasket Materials
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.000 INCHES NOMINAL IN
overall_length3.578 INCHES NOMINAL IN
aperture_diameter1.396 INCHES MINIMUM AND 1.416 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
outside_corner_radius0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
cross-sectional_thickness0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_width0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-074-4017
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS9144 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.396 INCHES MINIMUM AND 1.416 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
OVERALL LENGTH3.578 INCHES NOMINAL IN
OVERALL WIDTH3.000 INCHES NOMINAL IN
APERTURE DIAMETER1.396 INCHES MINIMUM AND 1.416 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SURFACE TREATMENTPASSIVATE OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE DIAMETER0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 6
SAE-AS9144Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS1000009Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS9144-01Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN100008Reference document
Same NSN cross-reference
Reference document — Secondary reference
149461Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS100009Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AS9144?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS9144?
AS9144 is a MODIFICATION KIT,GUN,WEAPON.
What parts can replace AS9144?
There are 6 known substitutes for AS9144: SAE-AS9144, MS1000009, MS9144-01 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS9144?
AS9144 is cataloged in the U.S. Government catalog under NSN 5330-00-074-4017. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS9144

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.