PartsTable
Technical Data Sheet
Download PDF

AS90376-32YF — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS90376-32YF: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC, design_type: FRICTION, overall_diameter: 2.0940 INCHES MINIMUM AND 2.1560 INCHES MAXIMUM IN, inside_diameter_length: 0.5910 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM IN, round_cap_outside_surface_condition: SMOOTH, material_document_and_classification: MIL-B-81705, TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-464-8354, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS90376-32YF
NSN: 5340-01-464-8354
FSC: 5340 — Hardware, Commercial
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialPLASTIC
design_typeFRICTION
overall_diameter2.0940 INCHES MINIMUM AND 2.1560 INCHES MAXIMUM IN
inside_diameter_length0.5910 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM IN
round_cap_outside_surface_conditionSMOOTH
material_document_and_classificationMIL-B-81705, TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE
opening_inside_diameter_for_which_designed1.8800 INCHES MINIMUM AND 1.9000 INCHES MAXIMUM IN
NSN5340-01-464-8354
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS90376-32YF MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 2.0940 INCHES MINIMUM AND 2.1560 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-81705, TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 1.8800 INCHES MINIMUM AND 1.9000 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC
•
INSIDE DIAMETER LENGTH: 0.5910 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER2.0940 INCHES MINIMUM AND 2.1560 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-81705, TYPE 2 MIL SPEC SINGLE MATERIAL RESPONSE
OPENING INSIDE DIAMETER FOR WHICH DESIGNED1.8800 INCHES MINIMUM AND 1.9000 INCHES MAXIMUM IN
MATERIALPLASTIC
INSIDE DIAMETER LENGTH0.5910 INCHES MINIMUM AND 0.6560 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES 3
M85049/138-63BReference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS90376-32YFReference document
Same NSN cross-reference
Reference document — Secondary reference
SAE-AS85049/138Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AS90376-32YF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS90376-32YF?
AS90376-32YF is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace AS90376-32YF?
There are 3 known substitutes for AS90376-32YF: M85049/138-63B, MS90376-32YF, SAE-AS85049/138. Substitute compatibility should be verified for your specific system.
What is the NSN for AS90376-32YF?
AS90376-32YF is cataloged in the U.S. Government catalog under NSN 5340-01-464-8354. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS90376-32YF

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.