PartsTable
Technical Data Sheet

AS85449/1 — CLAMP,SADDLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS85449/1: CLAMP,SADDLE.

The CLAMP,SADDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321 BAND, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 4.516 INCHES NOMINAL IN, style_designator: SADDLE MOUNT, material_thickness: 0.030 INCHES NOMINAL IN, loop_inside_diameter: 2.985 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-624-2178, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS85449/1
NSN: 5340-01-624-2178
NIINs: 016242178, 016655989
FSC: 5340 — Hardware, Commercial
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP 321 BAND
overall_width0.750 INCHES NOMINAL IN
overall_length4.516 INCHES NOMINAL IN
style_designatorSADDLE MOUNT
material_thickness0.030 INCHES NOMINAL IN
loop_inside_diameter2.985 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end2.258 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyCLAMP,LOOP
center_to_center_distance_between_loop_and_mounting_hole2.000 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
NSN5340-01-624-2178
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS85449/1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SADDLE MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.258 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 2.000 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSADDLE MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE BAND
OVERALL LENGTH4.516 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.258 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP,LOOP
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.000 INCHES MINIMUM AND 2.015 INCHES MAXIMUM IN
MATERIALSTEEL COMP 321 BAND
LOOP INSIDE DIAMETER2.985 INCHES MINIMUM AND 3.015 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AS85449/1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS85449/1?
AS85449/1 is a CLAMP,SADDLE.
What is the NSN for AS85449/1?
AS85449/1 is cataloged in the U.S. Government catalog under NSN 5340-01-624-2178. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS85449/1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.