AS83248/2 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS83248/2: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, center_hole_diameter: 0.108 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-132-1925, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS83248/2

NSN: 5331-01-132-1925
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
temp_rating	-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating	90.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
center_hole_diameter	0.108 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-01-132-1925

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN

•

HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.108 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.243 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
HARDNESS RATING	90.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.108 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 8

2-006-V709-90Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

4405592-0060Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

NAS1594-046Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

M83248/2-6Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

N90-84301Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

MIL-R-83248/2Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS83248/2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS83248/2?

AS83248/2 is a O-RING.

What parts can replace AS83248/2?

There are 8 known substitutes for AS83248/2: 2-006-V709-90, 4405592-0060, NAS1594-046 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS83248/2?

AS83248/2 is cataloged in the U.S. Government catalog under NSN 5331-01-132-1925. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS83248/2 — O-RING

Request a Quote — AS83248/2