PartsTable
Technical Data Sheet

AS81934/1-08L — BEARING,PLAIN,ROD END

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

AS81934/1-08L: BEARING,PLAIN,ROD END.

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4340 BODY, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, overall_length: 2.928 INCHES MINIMUM AND 2.998 INCHES MAXIMUM IN, thread_diameter: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-608-6880, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS81934/1-08L
NSN: 3120-01-608-6880
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP 4340 BODY
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
overall_length2.928 INCHES MINIMUM AND 2.998 INCHES MAXIMUM IN
thread_diameter0.312 INCHES NOMINAL IN
style_designatorBALL TYPE
thread_directionRIGHT-HAND
inner_member_width0.623 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
outer_member_width0.510 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
shank_thread_length1.437 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
thread_quantity_per_inch24
NSN3120-01-608-6880
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: AS81934/1-08L · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK THREAD LENGTH: 1.437 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
•
BORE CENTER TO SHANK END DISTANCE: 2.428 INCHES MINIMUM AND 2.448 INCHES MAXIMUM IN
•
INNER MEMBER WIDTH: 0.623 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
OUTER MEMBER WIDTH: 0.510 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: BALL TYPE
•
THREAD DIAMETER: 0.312 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
SHANK THREAD LENGTH1.437 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
BORE CENTER TO SHANK END DISTANCE2.428 INCHES MINIMUM AND 2.448 INCHES MAXIMUM IN
INNER MEMBER WIDTH0.623 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
OUTER MEMBER WIDTH0.510 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
STYLE DESIGNATORBALL TYPE
THREAD DIAMETER0.312 INCHES NOMINAL IN
OVERALL LENGTH2.928 INCHES MINIMUM AND 2.998 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
SHANK STYLEEXTERNALLY THREADED
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 2
SAE AS 81934Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS81935/1-8LReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AS81934/1-08L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS81934/1-08L?
AS81934/1-08L is a BEARING,PLAIN,ROD END.
What parts can replace AS81934/1-08L?
There are 2 known substitutes for AS81934/1-08L: SAE AS 81934, AS81935/1-8L. Substitute compatibility should be verified for your specific system.
What is the NSN for AS81934/1-08L?
AS81934/1-08L is cataloged in the U.S. Government catalog under NSN 3120-01-608-6880. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS81934/1-08L