Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B ALL ENDS, connection_type: THREADED INTERNAL TUBE ALL ENDS, inside_diameter: 0.212 INCHES NOMINAL IN, connection_style: SWIVEL NUT FLARE ALL ENDS, outside_diameter: 0.405 INCHES MINIMUM AND 0.465 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-001-0092, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
AS604
NSN:4720-00-001-0092 FSC:4720 CAGE:81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
temp_rating
-65.0 FAHRENHEIT AND 400.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class
3B ALL ENDS
connection_type
THREADED INTERNAL TUBE ALL ENDS
inside_diameter
0.212 INCHES NOMINAL IN
connection_style
SWIVEL NUT FLARE ALL ENDS
outside_diameter
0.405 INCHES MINIMUM AND 0.465 INCHES MAXIMUM IN
operating_pressure
3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
width_across_flats
0.56 INCHES NOMINAL ALL ENDS IN
burst_test_pressure
12000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size
0.4375 INCHES ALL ENDS IN
end_connection_design
STRAIGHT ALL ENDS
media_for_which_designed
HYDRAULIC FLUID AND AIR SINGLE RESPONSE
NSN
4720-00-001-0092
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
MINIMUM INSIDE BENDING RADIUS: 2.875 INCHES IN
•
THREAD CLASS: 3B FIRST END
•
FLOW ANGLE: 90.0 DEGREES SECOND END
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) SECOND END
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
INSIDE DIAMETER: 0.391 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLE
ROUND
MINIMUM INSIDE BENDING RADIUS
2.875 INCHES IN
THREAD CLASS
3B FIRST END
FLOW ANGLE
90.0 DEGREES SECOND END
THREAD SERIES DESIGNATOR
UNIFIED NATIONAL JOINT FINE (UNJF) SECOND END
OPERATING PRESSURE
3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS604?
AS604 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace AS604?
There are 5 known substitutes for AS604: 171145-8CR-0176, MS27371H0176, SAE-AS604 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS604?
AS604 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-001-0092. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.