AS568B-127 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS568B-127: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, temp_rating: -35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.612 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN, center_hole_diameter: 1.418 INCHES MINIMUM AND 1.430 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-595-6199, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS568B-127

NSN: 5331-00-595-6199
NIINs: 005956199, 010135827
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER CHLOROPRENE CLASS CR
temp_rating	-35.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.612 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN
center_hole_diameter	1.418 INCHES MINIMUM AND 1.430 INCHES MAXIMUM IN
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-00-595-6199

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.612 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 331 MAXIMUM

•

CENTER HOLE DIAMETER: 1.418 INCHES MINIMUM AND 1.430 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

TEMP RATING	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.612 INCHES MINIMUM AND 1.648 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	331 MAXIMUM
CENTER HOLE DIAMETER	1.418 INCHES MINIMUM AND 1.430 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 7

2-127-N674-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

2314-1277Reference document

Same NSN cross-reference

Reference document — Secondary reference

AS568-127 B46Reference document

Same NSN cross-reference

Reference document — Secondary reference

2990-9586PC32Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

ASTM-D2000 M3CH714A25B34EO1631EReference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-127Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS568B-127?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS568B-127?

AS568B-127 is a O-RING.

What parts can replace AS568B-127?

There are 7 known substitutes for AS568B-127: 2-127-N674-70, 2314-1277, AS568-127 B46 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS568B-127?

AS568B-127 is cataloged in the U.S. Government catalog under NSN 5331-00-595-6199. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS568B-127 — O-RING

Request a Quote — AS568B-127