PartsTable
Technical Data Sheet
Download PDF

AS568A-014-70EP — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS568A-014-70EP: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.489 INCHES NOMINAL IN, cross-sectional_height: 0.070 INCHES NOMINAL IN, end_item_identification: 5820-01-632-4222. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-633-6946, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568A-014-70EP
NSN: 5331-01-633-6946
FSC: 5331 — O-ring
CAGE: 62351 — APPLE RUBBER PRODUCTS, INC. DBA APPLE RUBBER PRODUCTS INC (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.489 INCHES NOMINAL IN
cross-sectional_height0.070 INCHES NOMINAL IN
end_item_identification5820-01-632-4222
NSN5331-01-633-6946
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568A-014-70EP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.489 INCHES NOMINAL IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.489 INCHES NOMINAL IN
END ITEM IDENTIFICATION5820-01-632-4222
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AS568A-014-70EP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568A-014-70EP?
AS568A-014-70EP is a O-RING.
What is the NSN for AS568A-014-70EP?
AS568A-014-70EP is cataloged in the U.S. Government catalog under NSN 5331-01-633-6946. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568A-014-70EP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.