PartsTable
Technical Data Sheet
Download PDF

AS568-920MILG23652TY2 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS568-920MILG23652TY2: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, outside_diameter: 1.711 INCHES NOMINAL IN, center_hole_diameter: 1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-019-3244, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-920MILG23652TY2
NSN: 5331-01-019-3244
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
outside_diameter1.711 INCHES NOMINAL IN
center_hole_diameter1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
NSN5331-01-019-3244
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-920MILG23652TY2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.711 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.114 INCHES MINIMUM AND 0.122 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.711 INCHES NOMINAL IN
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER1.461 INCHES MINIMUM AND 1.489 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 1
ARP568-920MILG2 3652TY2Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy AS568-920MILG23652TY2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-920MILG23652TY2?
AS568-920MILG23652TY2 is a O-RING.
What parts can replace AS568-920MILG23652TY2?
There is 1 known substitute for AS568-920MILG23652TY2: ARP568-920MILG2 3652TY2. Substitute compatibility should be verified for your specific system.
What is the NSN for AS568-920MILG23652TY2?
AS568-920MILG23652TY2 is cataloged in the U.S. Government catalog under NSN 5331-01-019-3244. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-920MILG23652TY2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.