PartsTable
Technical Data Sheet
Download PDF

AS568-914AMS3660 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS568-914AMS3660: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE, center_hole_diameter: 1.047 INCHES NOMINAL IN, cross-sectional_height: 0.116 INCHES NOMINAL IN, end_item_identification: SPRUANCE CLASS DD; VALVE, ANGLE RELIEF, material_document_and_classification: AMS 3660C ASSN STD ALL MATERIAL RESPONSES. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-468-5437, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-914AMS3660
NSN: 5331-01-468-5437
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE
center_hole_diameter1.047 INCHES NOMINAL IN
cross-sectional_height0.116 INCHES NOMINAL IN
end_item_identificationSPRUANCE CLASS DD; VALVE, ANGLE RELIEF
material_document_and_classificationAMS 3660C ASSN STD ALL MATERIAL RESPONSES
NSN5331-01-468-5437
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-914AMS3660 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.116 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3660C ASSN STD ALL MATERIAL RESPONSES
•
CENTER HOLE DIAMETER: 1.047 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.116 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3660C ASSN STD ALL MATERIAL RESPONSES
CENTER HOLE DIAMETER1.047 INCHES NOMINAL IN
END ITEM IDENTIFICATIONSPRUANCE CLASS DD; VALVE, ANGLE RELIEF
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
DX1200FF ITEM 32Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AS568-914AMS3660?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-914AMS3660?
AS568-914AMS3660 is a O-RING.
What parts can replace AS568-914AMS3660?
There is 1 known substitute for AS568-914AMS3660: DX1200FF ITEM 32. Substitute compatibility should be verified for your specific system.
What is the NSN for AS568-914AMS3660?
AS568-914AMS3660 is cataloged in the U.S. Government catalog under NSN 5331-01-468-5437. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-914AMS3660