PartsTable
Technical Data Sheet
Download PDF

AS568-906 NEOPRENE-1 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS568-906 NEOPRENE-1: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR, special_features: CAGE 66935 YORK INDUSTRIE/DBA JOHNSON CONTROLS, HOLDS DESIGN CONTROL., center_hole_diameter: 0.468 INCHES NOMINAL IN, cross-sectional_height: 0.078 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-473-9540, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-906 NEOPRENE-1
NSN: 5331-01-473-9540
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR
special_featuresCAGE 66935 YORK INDUSTRIE/DBA JOHNSON CONTROLS, HOLDS DESIGN CONTROL.
center_hole_diameter0.468 INCHES NOMINAL IN
cross-sectional_height0.078 INCHES NOMINAL IN
NSN5331-01-473-9540
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-906 NEOPRENE-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.078 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.468 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.078 INCHES NOMINAL IN
SPECIAL FEATURESCAGE 66935 YORK INDUSTRIE/DBA JOHNSON CONTROLS, HOLDS DESIGN CONTROL.
CENTER HOLE DIAMETER0.468 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR
SUBSTITUTES & CROSS-REFERENCES 5
364-48946-000 ITEM 58Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
376-92526-000 P/N 028-12934Reference document
Same NSN cross-reference
Reference document — Secondary reference
028-12934Reference document
Same NSN cross-reference
Reference document — Secondary reference
028-11195-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
364-48756-000 ITEM 139Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy AS568-906 NEOPRENE-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-906 NEOPRENE-1?
AS568-906 NEOPRENE-1 is a O-RING.
What parts can replace AS568-906 NEOPRENE-1?
There are 5 known substitutes for AS568-906 NEOPRENE-1: 364-48946-000 ITEM 58, 376-92526-000 P/N 028-12934, 028-12934 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS568-906 NEOPRENE-1?
AS568-906 NEOPRENE-1 is cataloged in the U.S. Government catalog under NSN 5331-01-473-9540. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-906 NEOPRENE-1