AS568-433 B46-70 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS568-433 B46-70: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 5.976 INCHES MINIMUM AND 6.074 INCHES MAXIMUM IN, center_hole_diameter: 5.452 INCHES MINIMUM AND 5.498 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-003-7591, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS568-433 B46-70

NSN: 5331-01-003-7591
FSC: 5331 — O-ring
CAGE: 01212 — FEDERAL-MOGUL CORP GOVERNMENT SALES DEPT (USA)

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating	-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	5.976 INCHES MINIMUM AND 6.074 INCHES MAXIMUM IN
center_hole_diameter	5.452 INCHES MINIMUM AND 5.498 INCHES MAXIMUM IN
elongation_percentage	331 MAXIMUM
cross-sectional_height	0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN	5331-01-003-7591

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 5.976 INCHES MINIMUM AND 6.074 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 331 MAXIMUM

•

CENTER HOLE DIAMETER: 5.452 INCHES MINIMUM AND 5.498 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

TEMP RATING	-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OUTSIDE DIAMETER	5.976 INCHES MINIMUM AND 6.074 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	331 MAXIMUM
CENTER HOLE DIAMETER	5.452 INCHES MINIMUM AND 5.498 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 5

YMD-5557-R ITEMReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

1205A1041Reference document

Same NSN cross-reference

Reference document — Secondary reference

2-433N674-70Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

530-10090-1Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

AS568-433Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy AS568-433 B46-70?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS568-433 B46-70?

AS568-433 B46-70 is a O-RING.

What parts can replace AS568-433 B46-70?

There are 5 known substitutes for AS568-433 B46-70: YMD-5557-R ITEM, 1205A1041, 2-433N674-70 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS568-433 B46-70?

AS568-433 B46-70 is cataloged in the U.S. Government catalog under NSN 5331-01-003-7591. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS568-433 B46-70 — O-RING

Request a Quote — AS568-433 B46-70