PartsTable
Technical Data Sheet
Download PDF

AS568-248-N470 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS568-248-N470: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER NATURAL, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 4.750 INCHES NOMINAL IN, cross-sectional_height: 0.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-458-4955, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-248-N470
NSN: 5331-01-458-4955
FSC: 5331 — O-ring
CAGE: 1CN74 — FREUDENBERG-NOK GENERAL PARTNERSHIP DBA INTERNATIONAL SEAL CO INC (USA)
SPECIFICATIONS
materialRUBBER NATURAL
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter4.750 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
NSN5331-01-458-4955
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-248-N470 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM
•
CENTER HOLE DIAMETER: 4.750 INCHES NOMINAL IN
•
MATERIAL: RUBBER NATURAL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM
CENTER HOLE DIAMETER4.750 INCHES NOMINAL IN
MATERIALRUBBER NATURAL
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy AS568-248-N470?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-248-N470?
AS568-248-N470 is a O-RING.
What is the NSN for AS568-248-N470?
AS568-248-N470 is cataloged in the U.S. Government catalog under NSN 5331-01-458-4955. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-248-N470