PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-247
AS568-247 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC, outside_diameter: 4.887 INCHES NOMINAL IN, center_hole_diameter: 4.5940 INCHES MINIMUM AND 4.6240 INCHES MAXIMUM IN, cross-sectional_height: 0.1350 INCHES MINIMUM AND 0.1430 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-132-1551, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-247
NSN: 5331-01-132-1551
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialPLASTIC
outside_diameter4.887 INCHES NOMINAL IN
center_hole_diameter4.5940 INCHES MINIMUM AND 4.6240 INCHES MAXIMUM IN
cross-sectional_height0.1350 INCHES MINIMUM AND 0.1430 INCHES MAXIMUM IN
NSN5331-01-132-1551
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-247 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 4.887 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.1350 INCHES MINIMUM AND 0.1430 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC
•
CENTER HOLE DIAMETER: 4.5940 INCHES MINIMUM AND 4.6240 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER4.887 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.1350 INCHES MINIMUM AND 0.1430 INCHES MAXIMUM IN
MATERIALPLASTIC
CENTER HOLE DIAMETER4.5940 INCHES MINIMUM AND 4.6240 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
2247Interchangeable
interchangeable cross-reference
interchangeable
XEJ12Interchangeable
interchangeable cross-reference
interchangeable
AR10SInterchangeable
interchangeable cross-reference
interchangeable
230079137Interchangeable
interchangeable cross-reference
interchangeable
15809D PIECE 93Interchangeable
interchangeable cross-reference
interchangeable
P48026 247Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-247?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-247?
AS568-247 is a O-RING.
What parts can replace AS568-247?
There are 16 known substitutes for AS568-247: 2247, XEJ12, AR10S and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS568-247?
AS568-247 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-132-1551. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-247

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026