PartsTable
Technical Data Sheet
Download PDF

AS568-231 NEOPRENE-1 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

AS568-231 NEOPRENE-1: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR, center_hole_diameter: 2.625 INCHES NOMINAL IN, cross-sectional_height: 0.125 INCHES NOMINAL IN, end_item_identification: COMPRESSOR, TURBO MNCH 364-51227-000. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-572-6741, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-231 NEOPRENE-1
NSN: 5331-01-572-6741
FSC: 5331 — O-ring
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
center_hole_diameter2.625 INCHES NOMINAL IN
cross-sectional_height0.125 INCHES NOMINAL IN
end_item_identificationCOMPRESSOR, TURBO MNCH 364-51227-000
NSN5331-01-572-6741
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-231 NEOPRENE-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.125 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 2.625 INCHES NOMINAL IN
•
MATERIAL: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.125 INCHES NOMINAL IN
CENTER HOLE DIAMETER2.625 INCHES NOMINAL IN
END ITEM IDENTIFICATIONCOMPRESSOR, TURBO MNCH 364-51227-000
MATERIALRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
364-51227-000 ITEM 193ESame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy AS568-231 NEOPRENE-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-231 NEOPRENE-1?
AS568-231 NEOPRENE-1 is a O-RING.
What parts can replace AS568-231 NEOPRENE-1?
There is 1 known substitute for AS568-231 NEOPRENE-1: 364-51227-000 ITEM 193E. Substitute compatibility should be verified for your specific system.
What is the NSN for AS568-231 NEOPRENE-1?
AS568-231 NEOPRENE-1 is cataloged in the U.S. Government catalog under NSN 5331-01-572-6741. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-231 NEOPRENE-1