PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS568-222-6865-70
AS568-222-6865-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include special_features: MATERIAL IS DISOGRIN AND SHALL BE PROCURED FROM FREUDENBERG-NOK CAGE 91251, peripheral_diameter: 1.762 INCHES NOMINAL IN, center_hole_diameter: 1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: 4610-01-234-2196. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-326-6741, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-222-6865-70
NSN: 5330-01-326-6741
FSC: 5330
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
special_featuresMATERIAL IS DISOGRIN AND SHALL BE PROCURED FROM FREUDENBERG-NOK CAGE 91251
peripheral_diameter1.762 INCHES NOMINAL IN
center_hole_diameter1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identification4610-01-234-2196
NSN5330-01-326-6741
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-222-6865-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.762 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESMATERIAL IS DISOGRIN AND SHALL BE PROCURED FROM FREUDENBERG-NOK CAGE 91251
END ITEM IDENTIFICATION4610-01-234-2196
CENTER HOLE DIAMETER1.469 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.762 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
11400065-2Interchangeable
interchangeable cross-reference
interchangeable
100504Interchangeable
interchangeable cross-reference
interchangeable
NAS1663-16Interchangeable
interchangeable cross-reference
interchangeable
100504SFInterchangeable
interchangeable cross-reference
interchangeable
M39029/5-116Interchangeable
interchangeable cross-reference
interchangeable
5100-001-16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-222-6865-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-222-6865-70?
AS568-222-6865-70 is a PACKING,PREFORMED.
What parts can replace AS568-222-6865-70?
There are 8 known substitutes for AS568-222-6865-70: 11400065-2, 100504, NAS1663-16 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS568-222-6865-70?
AS568-222-6865-70 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-326-6741. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-222-6865-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026