PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-220MILP5516CLA
AS568-220MILP5516CLA ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, hardness_rating: 68.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.637 INCHES NOMINAL IN, center_hole_diameter: 1.353 INCHES MINIMUM AND 1.365 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-878-0507, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-220MILP5516CLA
NSN: 5331-00-878-0507
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER
hardness_rating68.0 SHORE DUROMETER A NOMINAL
outside_diameter1.637 INCHES NOMINAL IN
center_hole_diameter1.353 INCHES MINIMUM AND 1.365 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-878-0507
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-220MILP5516CLA MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.353 INCHES MINIMUM AND 1.365 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.637 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
•
HARDNESS RATING: 68.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 160 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.353 INCHES MINIMUM AND 1.365 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.637 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER
HARDNESS RATING68.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE160 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
0X90-84325Interchangeable
interchangeable cross-reference
interchangeable
0XN90-84325CPInterchangeable
interchangeable cross-reference
interchangeable
N90-84325Interchangeable
interchangeable cross-reference
interchangeable
34-52X3-53-24B7Interchangeable
interchangeable cross-reference
interchangeable
0-1892Interchangeable
interchangeable cross-reference
interchangeable
15332860Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-220MILP5516CLA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-220MILP5516CLA?
AS568-220MILP5516CLA is a O-RING.
What parts can replace AS568-220MILP5516CLA?
There are 12 known substitutes for AS568-220MILP5516CLA: 0X90-84325, 0XN90-84325CP, N90-84325 and 9 more. Substitute compatibility should be verified for your specific system.
Is AS568-220MILP5516CLA still available?
AS568-220MILP5516CLA is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-220MILP5516CLA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026