PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-115MIL-G- 23652 TY 1

AS568-115MIL-G- 23652 TY 1 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 0.880 INCHES NOMINAL IN, center_hole_diameter: 0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN, cross-sectional_height: 0.103 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-404-4191, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-115MIL-G- 23652 TY 1
NSN: 5331-00-404-4191
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter0.880 INCHES NOMINAL IN
center_hole_diameter0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
cross-sectional_height0.103 INCHES NOMINAL IN
NSN5331-00-404-4191
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-115MIL-G- 23652 TY 1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CENTER HOLE DIAMETER: 0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.103 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.880 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIALRUBBER SYNTHETIC
CENTER HOLE DIAMETER0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.103 INCHES NOMINAL IN
OUTSIDE DIAMETER0.880 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
D15918-9InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
ARP568-115MILG23652TY1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AMS 7276InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
000115EEInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
PL-3879 ITEM 13InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
PL-3879 ITEM 13CPInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-115MIL-G- 23652 TY 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-115MIL-G- 23652 TY 1?
AS568-115MIL-G- 23652 TY 1 is a O-RING.
What parts can replace AS568-115MIL-G- 23652 TY 1?
There are 10 known substitutes for AS568-115MIL-G- 23652 TY 1: D15918-9, ARP568-115MILG23652TY1, AMS 7276 and 7 more. Substitute compatibility should be verified for your specific system.
Is AS568-115MIL-G- 23652 TY 1 still available?
AS568-115MIL-G- 23652 TY 1 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-115MIL-G- 23652 TY 1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026