PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-115/AMS-P-5516 CLB
AS568-115/AMS-P-5516 CLB ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The AS568-115/AMS-P-5516 CLB is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-927-9614, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-115/AMS-P-5516 CLB
NSN: 5331-00-927-9614
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
Part NumberAS568-115/AMS-P-5516 CLB
NSN5331-00-927-9614
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-115/AMS-P-5516 CLB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 0.880 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONFEAT
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
SPECIAL FEATURESCLEANED IN ACCORDANCE WITH MIL-STD-1330
OUTSIDE DIAMETER0.880 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
78004267Interchangeable
interchangeable cross-reference
interchangeable
211071633Interchangeable
interchangeable cross-reference
interchangeable
AS568-115Interchangeable
interchangeable cross-reference
interchangeable
02704Interchangeable
interchangeable cross-reference
interchangeable
MIL-STD-1330Interchangeable
interchangeable cross-reference
interchangeable
11860-09-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-115/AMS-P-5516 CLB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-115/AMS-P-5516 CLB?
AS568-115/AMS-P-5516 CLB is a AS568-115/AMS-P-5516 CLB.
What parts can replace AS568-115/AMS-P-5516 CLB?
There are 31 known substitutes for AS568-115/AMS-P-5516 CLB: 78004267, 211071633, AS568-115 and 28 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS568-115/AMS-P-5516 CLB?
AS568-115/AMS-P-5516 CLB is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-927-9614. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-115/AMS-P-5516 CLB

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026