PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-115 MIL-P-5516 CLASS A
AS568-115 MIL-P-5516 CLASS A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, outside_diameter: 0.880 INCHES NOMINAL IN, center_hole_diameter: 0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-150-4848, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-115 MIL-P-5516 CLASS A
NSN: 5331-01-150-4848
FSC: 5331 — O-RING
CAGE: 83143 — SPANJER BROS INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
outside_diameter0.880 INCHES NOMINAL IN
center_hole_diameter0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-01-150-4848
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-115 MIL-P-5516 CLASS A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.880 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER0.665 INCHES MINIMUM AND 0.683 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.880 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
115X31RInterchangeable
interchangeable cross-reference
interchangeable
137164Interchangeable
interchangeable cross-reference
interchangeable
83757Interchangeable
interchangeable cross-reference
interchangeable
0083757Interchangeable
interchangeable cross-reference
interchangeable
76-S-104 PIECE 4Interchangeable
interchangeable cross-reference
interchangeable
5305-99-606Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-115 MIL-P-5516 CLASS A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-115 MIL-P-5516 CLASS A?
AS568-115 MIL-P-5516 CLASS A is a O-RING.
What parts can replace AS568-115 MIL-P-5516 CLASS A?
There are 8 known substitutes for AS568-115 MIL-P-5516 CLASS A: 115X31R, 137164, 83757 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS568-115 MIL-P-5516 CLASS A?
AS568-115 MIL-P-5516 CLASS A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-150-4848. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-115 MIL-P-5516 CLASS A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026