AS568-024 MIL-P-5510 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

AS568-024 MIL-P-5510: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.254 INCHES NOMINAL IN, center_hole_diameter: 1.008 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN, elongation_percentage: 80 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-599-2753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

AS568-024 MIL-P-5510

NSN: 5331-00-599-2753
FSC: 5331 — O-ring
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating	-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hardness_rating	90.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.254 INCHES NOMINAL IN
center_hole_diameter	1.008 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN
elongation_percentage	80 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-599-2753

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.254 INCHES NOMINAL IN

•

HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 80 MAXIMUM

•

CENTER HOLE DIAMETER: 1.008 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

TEMP RATING	-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.254 INCHES NOMINAL IN
HARDNESS RATING	90.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	80 MAXIMUM
CENTER HOLE DIAMETER	1.008 INCHES MINIMUM AND 1.122 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 4

024-7799Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

669B244P12Reference document

Same NSN cross-reference

Reference document — Secondary reference

669B244PT12Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

914-12Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy AS568-024 MIL-P-5510?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is AS568-024 MIL-P-5510?

AS568-024 MIL-P-5510 is a O-RING.

What parts can replace AS568-024 MIL-P-5510?

There are 4 known substitutes for AS568-024 MIL-P-5510: 024-7799, 669B244P12, 669B244PT12 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for AS568-024 MIL-P-5510?

AS568-024 MIL-P-5510 is cataloged in the U.S. Government catalog under NSN 5331-00-599-2753. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

AS568-024 MIL-P-5510 — O-RING

Request a Quote — AS568-024 MIL-P-5510