PartsTable
Technical Data Sheet
PartsTable / O-RING / AS568-008 AS3209-008
AS568-008 AS3209-008 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.316 INCHES NOMINAL IN, center_hole_diameter: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN, cross-sectional_height: 0.070 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-026-2909, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS568-008 AS3209-008
NSN: 5331-01-026-2909
FSC: 5331 — O-RING
CAGE: 81343 — SOCIETY OF AUTOMOTIVE ENGINEERS INC (USA)
SPECIFICATIONS
materialRUBBER
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.316 INCHES NOMINAL IN
center_hole_diameter0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
cross-sectional_height0.070 INCHES NOMINAL IN
NSN5331-01-026-2909
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: AS568-008 AS3209-008 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.316 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.316 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.171 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
MATERIALRUBBER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
5253-635Interchangeable
interchangeable cross-reference
interchangeable
276Interchangeable
interchangeable cross-reference
interchangeable
AS568B-008Interchangeable
interchangeable cross-reference
interchangeable
J200AC8Interchangeable
interchangeable cross-reference
interchangeable
2-008C147-7Interchangeable
interchangeable cross-reference
interchangeable
AS568-008Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS568-008 AS3209-008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS568-008 AS3209-008?
AS568-008 AS3209-008 is a O-RING.
What parts can replace AS568-008 AS3209-008?
There are 12 known substitutes for AS568-008 AS3209-008: 5253-635, 276, AS568B-008 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS568-008 AS3209-008?
AS568-008 AS3209-008 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-026-2909. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS568-008 AS3209-008

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026